Bot User Guide

Customize the alerts you receive by setting your alert validity which coincides with your preferred risk level and trading horizon.

• 24 hour: Low risk and long term trade signals. Exit and entry points for HODL. (Investor)
• 4 hour: Medium risk and short/near term trade signals. Profit from volatility. (Swingtrader)
• 1 hour: High risk and very short term trade signals. Getting in and out trades. (Daytrader)

The trading horizon represents the time frame in which you are looking to end the trade.

A short horizon means the entire trade is expected to complete in a matter of hours.

A long horizon alert could take months before it reaches exhaustion.

If you are familiar with technical analysis, candlesticks and periods, all you need to know is that short/medium/long corresponds with 1hr, 4hr and 1D periods respectively.

This can be adjusted by using the /settings command, and then tapping the “Basic Setting” button.

Then tapping the “Validity Settings”.

Then tapping on the “24 hr” or “4 hr” or “1 hr” option.

In general, we suggest sticking to the 4 hr Level.

*Alerts may be sent to you at strange hours if you are using the 1 day trading horizon. This is a long term signal so you have a whole day to act on them. This signal is relevant for 24 hours after you receive it. Whereas, the swing-trader alerts are only relevant for the next 4 hours.

When receiving alerts, the altcoin price can be represented in terms of Bitcoin (BTC) or US Dollar Tether (USDT).

This can be adjusted by using the /setting command, and then clicking the “Basic Settings” button.

Then clicking on “Signals Setting”.

Then clicking on the “alt/BTC” or “alt/USDT” option. If there is a checkmark to the left of the option, then that option has been enabled. Both options can be enabled.

Customize the alerts you receive by choosing the specific coins you want to follow, or request to receive alerts for all of the altcoins listed on our platform.

We pull data from the following exchanges: Binance, Poloniex, Bittrex.

Choosing to follow all altcoins can be turned on by using the /wizard command.

Specific coins can be selected by using the /settings command, and then tapping the “Basic Settings” button.

Then tapping “Signals Settings”.

Then tapping “Edit Coin Watchlist”.

Then tapping on the specific coins you want to follow. If there is a checkmark to the left of the coin symbol, then that coin is enabled. Tapping “>>” or “<<” will show the next page of altcoins.

This enhanced settings dashboard can be accessed by using the “/settings” command inside the Telegram Bot, then clicking on the “All Settings” option.

You will be able to more easily choose the exact coins you want to follow. There is a searchable interface, and you can quickly select and unselect all coins.

You also can easily toggle the cryptocurrency exchanges and technical analysis indicators you want to receive signals for.

This is really exciting for traders who only want to receive signals for a very specific indicator and nothing else.

For example, if you only make trades based on Ichimoku Cloud Breakout, now you can filter out all the other signals we provide users so that you only get alerts when a breakout occurs for the coins of your choice.

Quickly view the amount of a specific coin that was traded in the previous 24 hours. All trade volume is represented in terms of Bitcoin. The UTC time & date this data was updated is also shown so you know when the 24 hour period is calculated from.

Trading volume can be viewed by typing “/volume” and the ticker symbol of the coin you want to view. For example: “/volume ETH”. To view this data, you must also be following the coin.

Quickly view the current price of a specific coin. Price is represented in terms of Bitcoin. The coin’s rank on Poloniex and the percentage change is listed. The UTC time & date this data was updated is also shown so you know when the 24 hour period is calculated from.

Coin price can be viewed by typing “/price” and the ticker symbol of the coin you want to view. For example: “/price ETH”. To view this data, you must also be following the coin.

Receive a Crowd Sentiment Alert that helps you stay on top of what is happening in the cryptocurrency world, and how people feel about what’s happening.

Sentiment is represented for each alert as Bullish, Bearish, and Important. We pull this data from CryptoPanic and present it to you.

Below each Crowd Sentiment Alert, you will see 3 buttons for Bullish, Bearish, and Important. This is for you to respond to the alert with how you feel about it. Your responses are added to our own database where we combine it with the data we received from CryptoPanic.

These alerts are time-sensitive, and can only be updated for a few minutes after published to Telegram. So, if you want to respond to a Crowd Sentiment Alert, please respond within a few minutes of the alert being posted in your feed.

When viewing crowd sentiment for these alerts (i.e. Bullish, Bearish, and Important), please note that it is only active for a few minutes and then new responses will no longer be updated inside the alert.

Crowd Sentiment Alerts can be enabled and disabled by using the /settings command, and then tapping the “Basic” button.

Then tapping on “Signal Settings".

Then tapping on the “Turn Crowd Sentiment On/Off” option.

The RSI is one of the most widely used momentum indicators, because it’s very easy to use. When it’s too high, it basically means that the price has gone up too fast relative to its recent price action. This means it’s “overbought”, indicating a potential pause or price reversal. When it’s too low, it means it's “oversold.”

In financial markets, the standard range would be 30 (too low) to 70 (too high). However, because crypto is so volatile, the RSI often moves from 20 to 80.

This signal is automatic and will send you an alert for the coins you follow, when appropriate.

Ichimoku translates to “at one glance”. It is named this way because it combines a large number of popular trading techniques into one single indicator, allowing a trader to analyze an entire chart with a quick look. It revolves around the idea that markets always want to be in a state of equilibrium. Because of this, it’s especially effective in indicating the beginning of big and powerful bull and bear trends.

However, most people feel this indicator is very overwhelming to learn because it consists of many different moving parts that are all interconnected.

We have fully automated this indicator, and our bot will keep track of cloud breakouts for all available coins 24/7. Cloud breakouts are usually followed by big bull rallies. Keep in mind that the Ichimoku Cloud is less effective in sideways, ranging, or consolidating markets.

You can find a more detailed explanation here: Crypto 101 - The Ichimoku Advantage

This signal is automatic and will send you an alert for the coins you follow, when appropriate.

This alert is unique to ITF and combines the power of Relative Strength Index (RSI) and Simple Moving Average (SMA) to tell you when a bull trend is coming.

This combination outperforms RSI in 41% of cases.

We use SMA 50, SMA 200, and RSI for the day to identify trend reversals. This signal is best used for long term positions.

This signal is automatic and will send you an alert for the coins you follow, when appropriate.

The Volume Based Indicator (VBI) is one of the oldest day trading indicators, and is also one of the most popular indicators for market technicians.

Essentially, VBI tells you when trading volume has increased for your chosen coin, and may signal a bullish trend.

This signal is automatic and will send you an alert for the coins you follow, when appropriate.

Our technology monitors thousands of real-time data points, identifies opportunities using machine learning algorithms and technical analysis, then provides you with actionable alerts you can trade on.

The ITF machine learning algorithms and AI have spent the past few months getting better and better at predicting what might happen in cryptocurrency markets.

These AI trading signals display the percentage probability that a coin’s price will increase, or decrease over a specific period of time.

This signal is automatic and will send you an alert for the coins you follow, when appropriate.

Here is a video tutorial explaining how to upgrade to Pro by paying with ETH:

Otherwise, here are the step-by-step instructions.

Upgrade your bot subscription by using the /settings command, and then tapping the “All Settings” button which takes you to our web app.

Then tap “Subscription”.

To pay in ETH, select “Pay with Ethereum". It will highlight in blue when selected, then click “Next”.

You have the option of purchasing for 1 month, 3 months, or 12 months. Your choice will be highlighted in blue. You can customize your subscription duration simply by sending any different amount of ETH.

Copy the receiver address by clicking the QR code and paste it into the “To” field wherever you decide to send your ETH from.

Be sure you are sending ETH to an ETH address. Sending ETH to an address of a different coin, will result in a loss of coins.

Once you send your ETH, the transaction will be marked as “Pending”. Please wait until the transaction is marked “Confirmed” before signing your transaction.

Once your transaction is confirmed, click the “Sign your transaction” button at the bottom of the page, to prove your ownership.

Paste your transaction hash from the QR code, into the first box on line 1.

Then click on the bolded hash that appears on line “2” to copy the address. This address will be pasted into message field of your transaction signer.

Then visit the service that you use to sign transactions. We use MyCrypto. For convenience, click “MyCrypto” to select the transaction signer you want to use. In this example, we used MetaMask.

Paste the address into the “Message” field and click “Sign Message”.

Then click the “Sign” button on the signature request you receive.

The full signature will appear at the bottom of the screen. Copy the signature.

Paste the signature into the large box on the “Payment” page, and click “Verify your signature”.

Now you have successfully paid for your subscription.

Click the “Go Home” button.

Under “Subscription” you will see how many days you have remaining with your Pro Plan.

You can extend your subscription at anytime by sending more ETH to the receiving address listed.

You can view the available subscription plans at intelligenttrading.com/pricing.

Here is a video tutorial explaining how to upgrade to Pro by paying with ITT:

Otherwise, here are the step-by-step instructions.

Upgrade your bot subscription by using the /settings command, and then tapping the “All Settings” button which takes you to our web app.

Then tap “Subscription”.

To pay in ITT Tokens, select “Pay with ITT”. It will highlight in blue when selected, then click “Next”.

You have the option of purchasing for 1 month, 3 months, or 12 months. Your choice will be highlighted in blue.

Copy the receiver address by clicking the QR code and paste it into the “To” field wherever you decide to send your ITT from.

Once you are notified that your transaction is confirmed, you will have access to the Pro Plan.

If you aren’t sure how to get ITT tokens, click the “How to get ITT” button at the bottom of the page.

You can extend your subscription at anytime by sending more ITT tokens to the receiving address listed.

The current USD price of ITT tokens will be listed to help you calculate how many ITT tokens to transfer.

You can view the available subscription plans at intelligenttrading.com/pricing.

Here is a video tutorial explaining how to upgrade to Pro by staking ITT tokens:

Otherwise, here are the step-by-step instructions.

Upgrade your bot subscription by using the /settings command, and then tapping the “All Settings” button which takes you to our web app.

Then tap “Subscription”.

To pay by Staking ITT Tokens select “Stake ITT”. It will highlight in blue when selected, then click “Next”.

Once you hold 10,000 ITT Tokens in your account, you gain lifetime access to the Pro Plan.

If you have spent ITT Tokens in the past, it will be aggregated to the amount of ITT needed to reach 10,000 ITT.

Add the necessary amount of ITT by adding your wallet address, tap “Click to add your wallet address”.

Paste your wallet address into the field and click the green check mark.

Then click the “Sign to verify your address” button to prove ownership of this address.

Then click the bolded code in line 1, to copy it to your clipboard.

Then visit the service that you use to sign transactions, we use MyCrypto. For convenience click “MyCrypto” to select the transaction signer you want to use. This example, we used MetaMask.

Then paste the message into the large box and click “Sign Message”.

Then click the “Sign” button on the signature request you receive.

Once signed, select the full signature in the bottom box, and go back to the payment page.

Paste the signature into the box and click “Verify your signature”.

Now your staking address has been verified.

A full green bar and a green “Active” label at the top will show that you have successfully staked enough ITT to begin using the Pro Plan. You do not have an expiration date when staking until you unstake your ITT tokens. After unstaking, your plan will be rolled back to your subscription plan prior to staking ITT.

To help you setup the Intelligent Trading Bot quickly, we’ve created a wizard that walks you through 3 simple steps.

As a premium subscriber, you can access the wizard at anytime by using the /wizard command, then selecting your preferences in each step.

1. Trading Profile / Risk Level (High / Medium / Low)

2. Enable All Altcoins (Yes / No)

3. Enable Sentiment Alerts (On / Off)

Provide our team with your feedback, issues, comments, and opinions by using the /feedback command inside the ITF Telegram Bot.

Feedback can be sent by typing “/feedback” and the message you want to send our team.

For example: “/feedback I love these new alerts, but there are so many!”

If you ever want to pause the alerts you receive, you can use the /settings command, tapping “Basic Settings”, then tapping “Turn alerts off”.

When you want start receiving alerts again, use the /settings command, and tap “Basic Settings” then tapping “Turn alerts on”.

If you no longer want to use our Bot, you can unsubscribe. Inside of Telegram, go to the Bot Info page for the ITF Bot. Then click “Stop and block bot” at the bottom of the page.